文章详情

泰士昆ICT测试仪Focus-2000

  • 产品名称:泰士昆ICT测试仪Focus-2000
  • 产品型号:Focus-2000
  • 产品厂商:其它品牌
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍
FOCUS-2000在线测试仪中,变得简单了,另外为了更正确的测定,增加了自动屏蔽针设定等各种测试支援功能。检查速度的提高,另外短路.断线测试时针全部选择处理的时间被大幅的改善,总计比前产品的检查速度加快了1.5倍。由于操作系统使用Windows2000,操作方法与别的Windows运用完全相同TESCON生产的Point66、Point70、Point88等系列可以完全互换。 

泰士昆ICT测试仪Focus-2000

的详细介绍
·调试支援功能

至今为止在线投入后的调试时间是非常花费的。但是在Focus-2000中,变得简单了。另外,为了更正确的测定,增加了自动屏蔽针设定等各种调试支援功能。

·检查速度的提高

消除了计算机中直接控制测定系统的信号处理所花费的时间。另外·短路测试时针全部选择处理的时间被大幅的改善, 总计比以前产品的检查速度加快了1. 5倍。

·操作简单

由于操作系统使用较新的windows7 ,更加适应现行计算机操作的要求,无需记忆新的操作方法。另外,通过使用密码,能够限制功能,从而能防止检查数据和设置被更改。

·维护

ON・OFF的反复切换,MPX部的开关采用无寿命半导体开关,所以无需有维护成本的意识。而且,因为不会积存静电,所以不会对被测试电路板造成应力。

·与TESCON产品完全互换

可与TESCON生产的Point-55系列完全互换。不仅现在正在使用的针床可以使用,而且测试程序也可以继续使用。

·丰富的选项
通过条形码,SQL的读取,对数据库服务器进行存取。JTAG测试的对应,各种功能测试电路扳的对应。高电压试验,根据4端于测定进行低电阻测定。复合压床(较大4台)的对应,压床放心罩, CE规格。



·Enhanced debugging tool 
Debugging of programs will be much simpler and faster with the new enhanced debugging tool.
The enhancement on various function such as the complex Auto- guarding point selection system will assist user to set up reliable test program with minimal effort and speed.

·Increased testing speed 
With our latest technology of direct access of measurement board from computer eliminates unnecessary signal protocol thus resulting increased testing time by as much as 1.5 times as compare to our earlier products.

·Ease of operation 
By employing Windows 2000 as the core operating system makes Focus 2000 easier to handle and operate based on the user friendly graphical user interface.

·Full compatibility with Tescon 
Focus 2000 is designed to handle Tescon Point-70/ 55 series test fixture and software with full compatibility.
As such, no further modification necessary for application of Tescon based test fixtures.

·Various options 
Bar code reader, Date base server access by SQL, JTAG test, Additional functional test board, High Voltage test, 4points contact low valued resistor test, Safety cover for press unit, CE-Marking, Multiple press unit system (Max: 4 press unit).



·测试仪仕样

测试点数

256个测试点(标准) ~较大2048个测试点
可以增设( 以128个测试点为个单位) (较大测试点为16000个选项※另外增设使用单元)/td>

测试步数

无限制(根据记忆媒体) 
多程序・多模块对应

监视

较大5点,较大印加电流20mA

测定时间

短路/断线 l ms ~/ l 个测试点, 
组件测试 0.75ms ~

查项目/检查范围

全选 开/短路测试

阈值:5Ω、20Ω、80Ω可选

电阻

01Ω~ 40.00MΩ 
低电阻测定(选项)
(0.01Ω~4000Ω 分解能0.01Ω) 
低电阻测定时推荐使用开尔文MPX(选项)

电容

10.0pF~40mF

电感

10μH~40H

二极管

0.1V~9.9V

数字三极管

测定 Vce(Vce=0.1V~9.9V)

光电耦器

ON/OFF判定电压

电源限值

10mA

电流测定

0.1μA~20mA(Bias 0.01V~9.99V)

电容极性判别

PASS/FAIL

功能测试

0.1V~9.9V

 

 

·装置仕样

OS

Windows2000(TM) / WindowsXP(TM) / WindowsVista(TM)

CPU

Windows(TM)对应产品

显示器

15~17寸彩色液晶

使用电源

AC100V~240V ±10%(50/60)

外部接口

RS232C Ethernet USB(2.0)

可测定电路板尺寸范围

420mm×330mm 标准

打印机

感热仕样(用纸宽度:57mm 单色)

外形尺寸

730mm×800mm×1540mm

气压

0.5~1.0Mpa(干燥洁净的空气)

使用环境条件

温度:10℃~30℃、湿度:0%~80%

重量

130Kg

耗电量

130VA