文章详情

LED 测试卡

  • 产品名称:LED 测试卡
  • 产品型号:N1124A-003
  • 产品厂商:keysiht
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍
主要特性与技术指标 测试 400-660nm 范围内的 LED 色彩效果和 μW/cm2 的光强度(亮度) 专用体系结构可发送数字激励,测试 LED 的色彩效果和光度,并在不到 1.3秒内反馈多达 64 个 LED 的测试结果 一个 N1124A-003 LED 测试卡能够进行多达 64 个 LED 测试。三个 N1124A-003 LED 测试卡可在 i3070 系统(需要软件 Rel 8.3 及更高版本)上接通到一个 N1807A-001是德实用程序卡中 利用 i3070 已获砖利的无功率数字测试法同时启动多个 LED 获取 LED 色彩的峰值、基部或瞬间波长并返回纳米(nm)范围的测量结果 利用套管屏蔽来自周围 LED 的噪声(环境光),从而获得**的可重复性

LED 测试卡

的详细介绍

N1124A-003 i3070 LED 测试卡

主要特性与技术指标

  •  测试 400-660nm 范围内的 LED 色彩效果和 μW/cm2 的光强度(亮度)
  •  专用体系结构可发送数字激励,测试 LED 的色彩效果和光度,并在不到 1.3秒内反馈多达 64 个 LED 的测试结果
  •  一个 N1124A-003 LED 测试卡能够进行多达 64 个 LED 测试。三个 N1124A-003 LED 测试卡可在 i3070 系统(需要软件 Rel 8.3 及更高版本)上接通到一个 N1807A-001是德实用程序卡中
  •  利用 i3070 已获砖利的无功率数字测试法同时启动多个 LED
  •  获取 LED 色彩的峰值、基部或瞬间波长并返回纳米(nm)范围的测量结果
  •  利用套管屏蔽来自周围 LED 的噪声(环境光),从而获得**的可重复性

描述

  • Medalist i3070 LED Test The Keysight Technologies, Inc. Medalist i3070 light emitting diode (LED) test delivers uncompromising repeatability and accuracy in LED color and luminosity measurements with superior throughput during i3070 in-circuit test. It returns the LED color value and luminosity in nanometers and μW/cm2 to accuracies of ± 3 nm and ± 10% respectively. It can test up to 128 LEDs in less than 1.3 seconds, increasing your i3070 test capacity, which translates to lower cost of in-circuit test.
     
    The i3070 LED test consists of: i3070 LED sensor i3070 LED signal conditioner (mux) i3070 LED test card i3070 LED test box i3070 LED starter kit i3070 LED software tools (i3070 release 8.3 and greater) i3070 runtime integration (i3070 release 8.3 and greater)
     
    The i3070 LED test sensors and LED signal conditioner (mux) card are installed in the i3070 test fixture similar to our VTEP solutions. Thirty-two i3070 LED test sensors can be wired to each i3070 LED signal conditioner (mux) card, and four i3070 LED signal conditioner (mux) cards to one i3070 LED test card in a Utility Card or an i3070 LED test box. The i3070 LED signal conditioner (mux) card in the fixture is then connected to the i3070 testhead electronics via the i3070 LED test card plugged into a utility card or a i3070 LED test box.  The i3070 LED test box saves a hybrid card slot and is mounted within the i3070 test head.
  • i3070 LED Test Specifications
     
    Measurement Range Units Accuracy
    Color (Hue) 400 to 660 nm ± 3 nm Luminosity 0 to 18,000 µW/cm2 ± 10%
     
    i3070 system requirements
     
    Software Release 8.3
    Hardware
    • Utility Card with i3070 LED test card  OR • i3070 LED test box